QNAP SS-EC1879U-SAS-RP

Product Position : 2.5'' SAS-enabled High-density Turbo NAS with Breakthrough Performance

Product Highlights :

  • 10GbE-ready, over 3,000 MB/s and 400,000 IOPS breakthrough performance
  • SSD caching, thin-provisioned volume
  • Scalable design, up to 792TB raw capacity


Hardware Specification :

CPUQuad Core Intel® Xeon® E3-1245 v2 Processor 3.4 GHz
MemorySystem memory: 8 GB DDR3 ECC RAM
Memory module pre-installed: 4 GB x2
Total memory slots: 4
Memory expandable up to: 32 GB (8GB x4)
Note:
1. When upgrading RAM to more than 24GB, the original 4GB RAM modules must be removed.
2. For the information of RAM module installation and compatible NAS models, please refer to the  QNAP RAM Module Installation Guide
Flash Memory512MB DOM
Hard Drive18 x 2.5-inch SAS/SATA 6Gb/s, SAS/SATA 3Gb/s hard drive or SSD hard drive
NOTE:
1. The standard system is shipped without hard drives.
2. For the hard drive compatibility list, please visit Compatibility list
Hard Drive Tray18 x hot-swappable and lockable tray
LAN Port4 x Gigabit RJ-45 Ethernet port
(Expandable up to 8 x 1 Gb LAN or 4 x 10 Gb + 4 x 1 Gb LAN by installing optional dual-port 10 Gb and 1 Gb network card)
NOTE:
1. For the optional network card compatibility list, please visit Compatibility list of Expansion Card
2. For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual.
LED IndicatorsStatus, 10 GbE, LAN, storage expansion port status
USB2x USB 3.0 port (rear)
4x USB 2.0 port (rear)
Support USB printer, pen drive, USB hub, and USB UPS etc.
Storage Expansion Port1 (rear)
ButtonsSystem: Power button and reset button
Alarm BuzzerSystem warning
Form Factor2U, Rackmount
Dimensions88(H) x 439(W) x 520(D) mm
3.46(H) x 17.28(W) x 20.47(D) inch
Weight10.8 kg/ 23.81 lb (Net)
16.28 kg/ 35.89 lb (Gross)
Sound Level (dB)Sound pressure (LpAm) (by stander positions): 44.7 dB
( with 18 x Seagate ST9300653SS hard drive installed )
Power Consumption (W)HDD Standby: 126.4 W
In Operation: 206 W
(with 18 x Seagate ST9300653SS hard drive installed)
Temperature0-40˚C
Relative Humidity5~95% RH non-condensing, wet bulb: 27˚C
Power SupplyRedundant power:
Input: 100-240V AC,50-60Hz
Output: 600W
Expansion Slot2 (one PCIe Gen2 x4, one PCIe Gen2 x8)
Fan3 x 6 cm smart cooling fan


QNAP SS-EC1279U-SAS-RP

Product Position : 2.5'' SAS-enabled High-density Turbo NAS with Breakthrough Performance

Product Highlights :

  • 10GbE-ready, over 3,000 MB/s and 400,000 IOPS breakthrough performance
  • SSD caching, thin-provisioned volume
  • Scalable design, up to 792TB raw capacity


Hardware Specification :

CPUQuad Core Intel® Xeon® E3-1245 v2 Processor 3.4 GHz
MemorySystem memory: 8 GB DDR3 ECC RAM
Memory module pre-installed: 4 GB x2
Total memory slots: 4
Memory expandable up to: 32 GB (8GB x4)
Note:
1. When upgrading RAM to more than 24GB, the original 4GB RAM modules must be removed.
2. For the information of RAM module installation and compatible NAS models, please refer to the  QNAP RAM Module Installation Guide
Flash Memory512MB DOM
Hard Drive12 x 2.5-inch SAS/SATA 6Gb/s, SAS/SATA 3Gb/s hard drive or SSD hard drive
NOTE:
1. The standard system is shipped without hard drives.
2. For the hard drive compatibility list, please visit Compatibility list
Hard Drive Tray12 x hot-swappable and lockable tray
LAN Port4 x Gigabit RJ-45 Ethernet port
(Expandable up to 8 x 1 Gb LAN or 4 x 10 Gb + 4 x 1 Gb LAN by installing optional dual-port 10 Gb and 1 Gb network card)
NOTE:
1. For the optional network card compatibility list, please visit Compatibility list of Expansion Card
2. For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual.
LED IndicatorsStatus, 10 GbE, LAN, storage expansion port status
USB2x USB 3.0 port (rear)
4x USB 2.0 port (rear)
Support USB printer, pen drive, USB hub, and USB UPS etc.
Storage Expansion Port1 (rear)
ButtonsSystem: Power button and reset button
Alarm BuzzerSystem warning
Form Factor2U, Rackmount
Dimensions88(H) x 439(W) x 520(D) mm
3.46(H) x 17.28(W) x 20.47(D) inch
Weight10.8 kg/ 23.81 lb (Net)
16.28 kg/ 35.89 lb (Gross)
Sound Level (dB)Sound pressure (LpAm) (by stander positions): 43.4 dB
( with 12 x Seagate ST9300653SS hard drive installed )
Power Consumption (W)HDD Standby: 118.1 W
In Operation: 157 W
(with 12 x Seagate ST9300653SS hard drive installed)
Temperature0-40˚C
Relative Humidity5~95% RH non-condensing, wet bulb: 27˚C.
Power SupplyRedundant power:
Input: 100-240V AC,50-60Hz
Output: 600W
Expansion Slot2 (one PCIe Gen2 x4, one PCIe Gen2 x8)
Fan3 x 6 cm smart cooling fan


QNAP TS-EC2480U R2

Product Position : Powerful NAS with Built-in 10GbE for Breakthrough Performance

Product Highlights :

  • Built-in 10GbE, over 3,500 MB/s throughput and 390,000 IOPS breakthrough performance
  • SSD caching beneficial to IOPS demanding applications
  • Scalable design, over 816TB raw capacity


Hardware Specification :

CPUTS-EC2480U-E3-4GE-R2: Intel® Xeon® E3-1246 v3 Quad-core processor
TS-EC2480U-i3-4GE-R2: Intel ® Core i3-4150 processor
TS-EC2480U-i3-8G-R2:Intel® Core i3-4150 processor
MemoryTotal memory slots: 4
TS-EC2480U-E3-4GE-R2/ TS-EC2480U-i3-4GE-R2:
System memory: 4 GB DDR3 ECC RAM
Memory module pre-installed: 2 GB x2
Memory expandable up to: 32 GB (8GB x4)
TS-EC2480U-i3-8G-R2:
System memory: 8 GB DDR3 non-ECC RAM
Memory module pre-installed: 4 GB x2
Memory expandable up to: 32 GB (8GB x4)
Note:
1. When upgrading RAM to more than 28GB, the original 4GB RAM modules must be removed.
2. For the information of RAM module installation and compatible NAS models, please refer to the QNAP RAM Module Installation Guide
Flash Memory512MB DOM
Internal Cache PortTwo mSATA port on board for read caching
Note: The standard system is shipped without mSATA flash. For the optional mSATA flash, please visit
http://shop.qnap.com/
Hard Drive24 x 3.5-inch SATA 6Gbps/3Gbps hard drive or 2.5-inch SATA, 6Gbps/3Gbps hard drive SSD hard drive
NOTE:
1. The standard system is shipped without hard drives.
2. For the hard drive compatibility list, please visit Compatibility list
Hard Drive Tray24 x hot-swappable and lockable tray
LAN PortBuilt-in 2 x 10 GbE SFP+ ports (LAN-10G2SF-MLX) and 4 x GbE ports
40GbE is optional
Note:
1. For the optional network card compatibility list, please visit Compatibility list of Expansion Card
2. For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual.
LED IndicatorsStatus, 10 GbE, LAN, eSATA, storage expansion port status
USB4x USB 3.0 port (rear)
4x USB 2.0 port (rear)
Support USB printer, pen drive, USB hub, and USB UPS etc.
ButtonsSystem: Power button and reset button
Alarm BuzzerSystem warning
Form Factor4U, Rackmount
Dimensions176.15(H) x 442.5(W) x 530.5(D) mm
6.94(H) x 17.42(W) x 20.89(D) inch
WeightNet weight (NAS only) : 23.08 kg/50.88 lb
Gross weight (with packing and accessories) : 28.56 kg/ 62.96 lb
Power Consumption (W)Sleep mode: 129.43
In Operation: 263.81 W
(with 24 x HITACHI HUS724020ALA640 hard drive installed)
Sound Level*Sound pressure (LpAm) :48.3 dB(A)
Temperature0-40˚C
Relative Humidity5~95% non-condensing, wet bulb: 27˚C.
Power SupplyRedundant power:
Input: 50-60 Hz; 100-127V~/ 8.5A; 200-240V/ 4.2A
Output: 650W
PCIe Slot2 (Right slot: 1* PCIe Gen3 x8; Left slot: 1* PCIe Gen3 x4)
Note:
The PCIe Gen3 x8 slot is occupied by a 10GbE network adapter.
Fan4 x 8 cm smart cooling fan


QNAP TS-EC1680U R2

Product Position : Powerful NAS with Built-in 10GbE for Breakthrough Performance

Product Highlights :

  • Built-in 10GbE, over 3,500 MB/s throughput and 390,000 IOPS breakthrough performance
  • SSD caching beneficial to IOPS demanding applications
  • Scalable design, over 816TB raw capacity


Hardware Specification :

CPUTS-EC1680U-E3-4GE-R2: Intel® Xeon® E3-1246 v3 Quad-core processor
TS-EC1680U-i3-4GE-R2: Intel ® Core i3-4150 processor
TS-EC1680U-i3-8G-R2:Intel® Core i3-4150 processor
MemoryTotal memory slots: 4
TS-EC1680U-E3-4GE-R2/ TS-EC1680U-i3-4GE-R2:
System memory: 4 GB DDR3 ECC RAM
Memory module pre-installed: 2 GB x2
Memory expandable up to: 32 GB (8GB x4)
TS-EC1680U-i3-8G-R2:
System memory: 8 GB DDR3 non-ECC RAM
Memory module pre-installed: 4 GB x2
Memory expandable up to: 32 GB (8GB x4)
Note:
1. When upgrading RAM to more than 28GB, the original 4GB RAM modules must be removed.
2. For the information of RAM module installation and compatible NAS models, please refer to the QNAP RAM Module Installation Guide
Flash Memory512MB DOM
Internal Cache PortTwo mSATA port on board for read caching
Note: The standard system is shipped without mSATA flash. For the optional mSATA flash, please visit
http://shop.qnap.com/
Hard Drive16 x 3.5-inch SATA 6Gbps/3Gbps hard drive or 2.5-inch SATA, 6Gbps/3Gbps hard drive SSD hard drive
NOTE:
1. The standard system is shipped without hard drives.
2. For the hard drive compatibility list, please visit Compatibility list
Hard Drive Tray16 x hot-swappable and lockable tray
LAN PortBuilt-in 2 x 10 GbE SFP+ ports (LAN-10G2SF-MLX) and 4 x GbE ports 
40GbE is optional
Note:
1. For the optional network card compatibility list, please visit Compatibility list of Expansion Card
2. For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual.
LED IndicatorsStatus, 10 GbE, LAN, eSATA, storage expansion port status
USB4x USB 3.0 port (rear)
4x USB 2.0 port (rear)
Support USB printer, pen drive, USB hub, and USB UPS etc.
ButtonsSystem: Power button and reset button
Alarm BuzzerSystem warning
Form Factor3U, Rackmount
Dimensions130(H) x 442.5(W) x 530.5(D) mm
5.12(H) x 17.42(W) x 20.89(D) inch
WeightNet weight (NAS only) : 18.3 kg/40.34 lb
Gross weight (with packing and accessories) : 24.18 kg/ 53.30 lb
Power Consumption (W)Sleep mode: 82.4
In Operation: 166.58 W
(with 16 x HITACHI HUS724020ALA640 hard drive installed)
Sound Level*Sound pressure (LpAm) :40.5 dB(A)
Temperature0-40˚C
Relative Humidity5~95% non-condensing, wet bulb: 27˚C.
Power SupplyRedundant power:
Input: 50-60 Hz; 100-127V~/ 8.5A; 200-240V/ 4.2A
Output: 650W
PCIe Slot2 (Right slot: 1* PCIe Gen3 x8; Left slot: 1* PCIe Gen3 x4)
Note:
The PCIe Gen3 x8 slot is occupied by a 10GbE network adapter.
Fan4 x 8 cm smart cooling fan


QNAP TS-EC1280U R2

Product Position : Powerful NAS with Built-in 10GbE for Breakthrough Performance

Product Highlights :

  • Built-in 10GbE, over 3,500 MB/s throughput and 390,000 IOPS breakthrough performance
  • SSD caching beneficial to IOPS demanding applications
  • Scalable design, over 816TB raw capacity


Hardware Specification :

CPUTS-EC1280U-E3-4GE-R2: Intel® Xeon® E3-1246 v3 Quad-core processor
TS-EC1280U-i3-4GE-R2: Intel ® Core i3-4150 processor
TS-EC1280U-i3-8G-R2:Intel® Core i3-4150 processor
MemoryTotal memory slots: 4
TS-EC1280U-E3-4GE-R2/ TS-EC1280U-i3-4GE-R2:
System memory: 4 GB DDR3 ECC RAM
Memory module pre-installed: 2 GB x2
Memory expandable up to: 32 GB (8GB x4)
TS-EC1280U-i3-8G-R2:
System memory: 8 GB DDR3 non-ECC RAM
Memory module pre-installed: 4 GB x2
Memory expandable up to: 32 GB (8GB x4)
Note:
1. When upgrading RAM to more than 28GB, the original 4GB RAM modules must be removed.
2. For the information of RAM module installation and compatible NAS models, please refer to the QNAP RAM Module Installation Guide
Flash Memory512MB DOM
Internal Cache PortTwo mSATA port on board for read caching
Note: The standard system is shipped without mSATA flash. For the optional mSATA flash, please visit
http://shop.qnap.com/
Hard Drive12 x 3.5-inch SATA 6Gbps/3Gbps hard drive or 2.5-inch SATA, 6Gbps/3Gbps hard drive SSD hard drive
NOTE:
1. The standard system is shipped without hard drives.
2. For the hard drive compatibility list, please visit Compatibility list
Hard Drive Tray12 x hot-swappable and lockable tray
LAN PortBuilt-in 2 x 10 GbE SFP+ ports (LAN-10G2SF-MLX) and 4 x GbE ports
40GbE is optional
Note:
1. For the optional network card compatibility list, please visit Compatibility list of Expansion Card
2. For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual.
LED IndicatorsStatus, 10 GbE, LAN, eSATA, storage expansion port status
USB4x USB 3.0 port (rear)
4x USB 2.0 port (rear)
Support USB printer, pen drive, USB hub, and USB UPS etc.
ButtonsSystem: Power button and reset button
Alarm BuzzerSystem warning
Form Factor2U, Rackmount
Dimensions88(H) x 442.5(W) x 530.5(D) mm
3.46(H) x 17.42(W) x 20.89(D) inch
WeightNet weight (NAS only) : 14.18 kg/ 31.26 lb
Gross weight (with packing and accessories) : 21.41 kg/ 47.20 lb
Power Consumption (W)Sleep mode: 80.41
In Operation: 166.58 W
(with 12 x 1TB hard drive installed)
Sound Level*Sound pressure (LpAm) :55.3 dB(A)
Temperature0-40˚C
Relative Humidity5~95% non-condensing, wet bulb: 27˚C.
Power SupplyRedundant power:
Input: 47-63 Hz; 100-127V~/ 8A; 200-240V/ 4A
Output: 400W
PCIe Slot2 (Right slot: 1* PCIe Gen3 x8; Left slot: 1* PCIe Gen3 x4)
Note:
The PCIe Gen3 x8 slot is occupied by a 10GbE network adapter.
Fan4 x 6 cm smart cooling fan


QNAP TS-EC880U R2

Product Position : Powerful NAS with Built-in 10GbE for Breakthrough Performance

Product Highlights :

  • Built-in 10GbE, over 3,500 MB/s throughput and 390,000 IOPS breakthrough performance
  • SSD caching beneficial to IOPS demanding applications
  • Scalable design, over 816TB raw capacity


Hardware Specification :

Product Position : Powerful NAS with Built-in 10GbE for Breakthrough Performance

Product Highlights :

  • Built-in 10GbE, over 3,500 MB/s throughput and 390,000 IOPS breakthrough performance
  • SSD caching beneficial to IOPS demanding applications
  • Scalable design, over 816TB raw capacity


Hardware Specification :

CPUMarvell 6282 1.6GHz
DRAM512MB DDR3 RAM
Flash Memory16MB
HDD2 x 3.5" SATA HDD
NOTE:
1. The system is shipped without HDD.
LAN Port1 x Gigabit RJ-45 Ethernet port
LED IndicatorsUSB, STATUS, HDD 1, HDD 2, LAN, Power
USB1 x USB 2.0 port (front: 1);
2 x USB 3.0 port (back: 2)
Support USB printer, pen drive, USB hub, and USB UPS etc.
ButtonsSystem: Power button, One touch copy button, Reset button
Alarm BuzzerSystem warning
Form FactorMini-Tower
Dimensions165.5 (H) x 85 (W) x 218.4 (D) mm
6.52 (H) x 3.35 (W) x 8.60(D) inch
WeightNet weight (NAS only) : 0.91 kg/ 2.01 lb
Gross weight (with packing and accessories) : 2.20 kg/4.85 lb
Power Consumption (W)Sleep mode: 6W
In operation: 13W
(with 2 x 500GB HDD installed)
Temperature0-40?C
Humidity5~95% RH non-condensing, wet bulb: 27?C
Power SupplyExternal Power Adapter, 60W, 100-240V
Secure DesignK-lock security slot for theft prevention
Fan1 x quiet cooling fan (6cm, 12V DC)
CPU
TS-EC880U-E3-4GE-R2: Intel® Xeon® E3-1246 v3 Quad-core processor
TS-EC880U-i3-4GE-R2: Intel ® Core i3-4150 processor
TS-EC880U-i3-8G-R2:Intel® Core i3-4150 processor
Memory
Total memory slots: 4
TS-EC880U-E3-4GE-R2/ TS-EC880U-i3-4GE-R2:
System memory: 4 GB DDR3 ECC RAM
Memory module pre-installed: 2 GB x2
Memory expandable up to: 32 GB (8GB x4)
TS-EC880U-i3-8G-R2:
System memory: 8 GB DDR3 non-ECC RAM
Memory module pre-installed: 4 GB x2
Memory expandable up to: 32 GB (8GB x4)
Note:
1. When upgrading RAM to more than 28GB, the original 4GB RAM modules must be removed.
2. For the information of RAM module installation and compatible NAS models, please refer to the QNAP RAM Module Installation Guide
Flash Memory
512MB DOM
Internal Cache Port
Two mSATA port on board for read caching
Note: The standard system is shipped without mSATA flash. For the optional mSATA flash, please visit
http://shop.qnap.com/
Hard Drive
8 x 3.5-inch SATA 6Gbps/3Gbps hard drive or 2.5-inch SATA, 6Gbps/3Gbps hard drive SSD hard drive
NOTE:
1. The standard system is shipped without hard drives.
2. For the hard drive compatibility list, please visit Compatibility list
Hard Drive Tray
8 x hot-swappable and lockable tray
LAN Port
Built-in 2 x 10 GbE SFP+ ports (LAN-10G2SF-MLX) and 4 x GbE ports
40GbE is optional
Note:
1. For the optional network card compatibility list, please visit Compatibility list of Expansion Card
2. For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual.
LED Indicators
Status, 10 GbE, LAN, eSATA, storage expansion port status
USB
4x USB 3.0 port (rear)
4x USB 2.0 port (rear)
Support USB printer, pen drive, USB hub, and USB UPS etc.
Buttons
System: Power button and reset button
Alarm Buzzer
System warning
Form Factor
2U, Rackmount
Dimensions
88(H) x 442.5(W) x 530.5(D) mm
3.46(H) x 17.42(W) x 20.89(D) inch
Weight
Net weight (NAS only) : 14.39 kg/ 31.72 lb
Gross weight (with packing and accessories) : 20.54 kg/ 45.28 lb
Sound Level*
Sound pressure (LpAm) :55.2 dB(A)
Power Consumption (W)
Sleep mode: 73.38
In Operation: 133.88 W
(with 12 x 1TB hard drive installed)
Temperature
0-40˚C
Relative Humidity
5~95% non-condensing, wet bulb: 27˚C.
Power Supply
Redundant power:
Input: 47-63 Hz; 100-127V~/ 8A; 200-240V/ 4A
Output: 400W
PCIe Slot
2 (Right slot: 1* PCIe Gen3 x8; Left slot: 1* PCIe Gen3 x4)
Note:
The PCIe Gen3 x8 slot is occupied by a 10GbE network adapter.
Fan
4 x 6 cm smart cooling fan


QNAP TS-EC2480U

Product Position : Powerful NAS with Intel® Xeon® Quad-Core CPU for Breakthrough Performance

Product Highlights :

  • 10GbE-ready, over 3,500 MB/s throughput and 390,000 IOPS breakthrough performance
  • SSD caching beneficial to IOPS demanding applications
  • Scalable design, over 816TB raw capacity


Hardware Specification :

CPUIntel® Xeon® E3-1200 v3 Family 3.4 GHz Quad Core Processor
MemorySystem memory: 4 GB DDR3 ECC RAM
Memory module pre-installed: 4 GB x1
Total memory slots: 4
Memory expandable up to: 32 GB (8GB x4)
Note:
1. When upgrading RAM to more than 28GB, the original 4GB RAM modules must be removed.
2. For the information of RAM module installation and compatible NAS models, please refer to the QNAP RAM Module Installation Guide
Flash Memory512MB DOM
Internal Cache PortTwo mSATA port on board for read caching
Note: The standard system is shipped without mSATA flash. For the optional mSATA flash, please visit
http://shop.qnap.com/
Hard Drive24 x 3.5-inch SATA 6Gbps/3Gbps hard drive or 2.5-inch SATA, 6Gbps/3Gbps hard drive SSD hard drive
NOTE:
1. The standard system is shipped without hard drives.
2. For the hard drive compatibility list, please visit Compatibility list
Hard Drive Tray24 x hot-swappable and lockable tray
LAN Port4 x Gigabit RJ-45 Ethernet port
(Expandable up to 8 x 1 Gb LAN or 4 x 10 Gb + 4 x 1 Gb LAN by installing optional dual-port 10 Gb and 1 Gb network card)
Note:
1. For the optional network card compatibility list, please visit Compatibility list of Expansion Card
2. For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual.
LED IndicatorsStatus, 10 GbE, LAN, eSATA, storage expansion port status
USB4x USB 3.0 port (rear)
4x USB 2.0 port (rear)
Support USB printer, pen drive, USB hub, and USB UPS etc.
ButtonsSystem: Power button and reset button
Alarm BuzzerSystem warning
Form Factor4U, Rackmount
Dimensions176.15(H) x 442.5(W) x 530.5(D) mm
6.94(H) x 17.42(W) x 20.89(D) inch
WeightNet weight (NAS only) : 23.08 kg/50.88 lb
Gross weight (with packing and accessories) : 28.56 kg/ 62.96 lb
Sound Level (dB)Sound Level (dB) Sound pressure (LpAm) (bystander position): 48.3 dB
(with 24 x HITACHI HUS724020ALA640 hard drive installed)
Sound Level*Sound pressure (LpAm) :48.3 dB(A)
Power Consumption (W)Sleep mode: 129.43
In Operation: 263.81 W
(with 24 x HITACHI HUS724020ALA640 hard drive installed)
Temperature0-40˚C
Relative Humidity5~95% non-condensing, wet bulb: 27˚C.
Power SupplyRedundant power:
Input: 50-60 Hz; 100-127V~/ 8.5A; 200-240V/ 4.2A
Output: 650W
PCIe Slot2 (1* PCIe Gen3 x8, 1* PCIe Gen3 x4)
Fan4 x 8 cm smart cooling fan


QNAP TS-EC1680U

Product Position : Powerful NAS with Intel® Xeon® Quad-Core CPU for Breakthrough Performance

Product Highlights :

  • 10GbE-ready, over 3,500 MB/s throughput and 390,000 IOPS breakthrough performance
  • SSD caching beneficial to IOPS demanding applications
  • Scalable design, over 816TB raw capacity


Hardware Specification :

CPUIntel® Xeon® E3-1200 v3 Family 3.4 GHz Quad Core Processor
MemorySystem memory: 4 GB DDR3 ECC RAM
Memory module pre-installed: 4 GB x1
Total memory slots: 4
Memory expandable up to: 32 GB (8GB x4)
Note:
1. When upgrading RAM to more than 28GB, the original 4GB RAM modules must be removed.
2. For the information of RAM module installation and compatible NAS models, please refer to the QNAP RAM Module Installation Guide
Flash Memory512MB DOM
Internal Cache PortTwo mSATA port on board for read caching
Note: The standard system is shipped without mSATA flash. For the optional mSATA flash, please visit
http://shop.qnap.com/
Hard Drive16 x 3.5-inch SATA 6Gbps/3Gbps hard drive or 2.5-inch SATA, 6Gbps/3Gbps hard drive SSD hard drive
NOTE:
1. The standard system is shipped without hard drives.
2. For the hard drive compatibility list, please visit Compatibility list
Hard Drive Tray16 x hot-swappable and lockable tray
LAN Port4 x Gigabit RJ-45 Ethernet port
(Expandable up to 8 x 1 Gb LAN or 4 x 10 Gb + 4 x 1 Gb LAN by installing optional dual-port 10 Gb and 1 Gb network card)
Note:
1. For the optional network card compatibility list, please visit Compatibility list of Expansion Card
2. For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual.
LED IndicatorsStatus, 10 GbE, LAN, eSATA, storage expansion port status
USB4x USB 3.0 port (rear)
4x USB 2.0 port (rear)
Support USB printer, pen drive, USB hub, and USB UPS etc.
ButtonsSystem: Power button and reset button
Alarm BuzzerSystem warning
Form Factor3U, Rackmount
Dimensions130(H) x 442.5(W) x 530.5(D) mm
5.12(H) x 17.42(W) x 20.89(D) inch
WeightNet weight (NAS only) : 18.3 kg/40.34 lb
Gross weight (with packing and accessories) : 24.18 kg/ 53.30 lb
Sound Level*Sound pressure (LpAm) :40.5 dB(A)
Power Consumption (W)Sleep mode: 82.4
In Operation: 166.58 W
(with 16 x HITACHI HUS724020ALA640 hard drive installed)
Temperature0-40˚C
Relative Humidity5~95% non-condensing, wet bulb: 27˚C.
Power SupplyRedundant power:
Input: 50-60 Hz; 100-127V~/ 8.5A; 200-240V/ 4.2A
Output: 650W
PCIe Slot2 (1* PCIe Gen3 x8, 1* PCIe Gen3 x4)
Fan4 x 8 cm smart cooling fan


QNAP TS-EC1280U

Product Position : Powerful NAS with Intel® Xeon® Quad-Core CPU for Breakthrough Performance

Product Highlights :

  • 10GbE-ready, over 3,500 MB/s throughput and 390,000 IOPS breakthrough performance
  • SSD caching beneficial to IOPS demanding applications
  • Scalable design, over 816TB raw capacity


Hardware Specification :

CPUIntel® Xeon® E3-1200 v3 Family 3.4 GHz Quad Core Processor
MemorySystem memory: 4 GB DDR3 ECC RAM
Memory module pre-installed: 4 GB x1
Total memory slots: 4
Memory expandable up to: 32 GB (8GB x4)
Note:
1. When upgrading RAM to more than 28GB, the original 4GB RAM modules must be removed.
2. For the information of RAM module installation and compatible NAS models, please refer to the QNAP RAM Module Installation Guide
Flash Memory512MB DOM
Internal Cache PortTwo mSATA port on board for read caching
Note: The standard system is shipped without mSATA flash. For the optional mSATA flash, please visit
http://shop.qnap.com/
Hard Drive12 x 3.5-inch SATA 6Gbps/3Gbps hard drive or 2.5-inch SATA, 6Gbps/3Gbps hard drive SSD hard drive
NOTE:
1. The standard system is shipped without hard drives.
2. For the hard drive compatibility list, please visit Compatibility list
Hard Drive Tray12 x hot-swappable and lockable tray
LAN Port4 x Gigabit RJ-45 Ethernet port
(Expandable up to 8 x 1 Gb LAN or 4 x 10 Gb + 4 x 1 Gb LAN by installing optional dual-port 10 Gb and 1 Gb network card)
Note:
1. For the optional network card compatibility list, please visit Compatibility list of Expansion Card
2. For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual.
LED IndicatorsStatus, 10 GbE, LAN, eSATA, storage expansion port status
USB4x USB 3.0 port (rear)
4x USB 2.0 port (rear)
Support USB printer, pen drive, USB hub, and USB UPS etc.
ButtonsSystem: Power button and reset button
Alarm BuzzerSystem warning
Form Factor2U, Rackmount
Dimensions88(H) x 442.5(W) x 530.5(D) mm
3.46(H) x 17.42(W) x 20.89(D) inch
WeightNet weight (NAS only) : 14.18 kg/ 31.26 lb
Gross weight (with packing and accessories) : 21.41 kg/ 47.20 lb
Sound Level*Sound pressure (LpAm) :55.3 dB(A)
Power Consumption (W)Sleep mode: 80.41
In Operation: 166.58 W
(with 12 x 1TB hard drive installed)
Temperature0-40˚C
Relative Humidity5~95% non-condensing, wet bulb: 27˚C.
Power SupplyRedundant power:
Input: 47-63 Hz; 100-127V~/ 8A; 200-240V/ 4A
Output: 400W
PCIe Slot2 (1* PCIe Gen3 x8, 1* PCIe Gen3 x4)
Fan4 x 6 cm smart cooling fan


QNAP TS-EC880U

Product Position : Powerful NAS with Intel® Xeon® Quad-Core CPU for Breakthrough Performance

Product Highlights :

  • 10GbE-ready, over 3,500 MB/s throughput and 390,000 IOPS breakthrough performance
  • SSD caching beneficial to IOPS demanding applications
  • Scalable design, over 816TB raw capacity


Hardware Specification :

CPUIntel® Xeon® E3-1200 v3 Family 3.4 GHz Quad Core Processor
MemorySystem memory: 4 GB DDR3 ECC RAM
Memory module pre-installed: 4 GB x1
Total memory slots: 4
Memory expandable up to: 32 GB (8GB x4)
Note:
1. When upgrading RAM to more than 28GB, the original 4GB RAM modules must be removed.
2. For the information of RAM module installation and compatible NAS models, please refer to the QNAP RAM Module Installation Guide
Flash Memory512MB DOM
Internal Cache PortTwo mSATA port on board for read caching
Note: The standard system is shipped without mSATA flash. For the optional mSATA flash, please visit
http://shop.qnap.com/
Hard Drive8 x 3.5-inch SATA 6Gbps/3Gbps hard drive or 2.5-inch SATA, 6Gbps/3Gbps hard drive SSD hard drive
NOTE:
1. The standard system is shipped without hard drives.
2. For the hard drive compatibility list, please visit Compatibility list
Hard Drive Tray8 x hot-swappable and lockable tray
LAN Port4 x Gigabit RJ-45 Ethernet port
(Expandable up to 8 x 1 Gb LAN or 4 x 10 Gb + 4 x 1 Gb LAN by installing optional dual-port 10 Gb and 1 Gb network card)
Note:
1. For the optional network card compatibility list, please visit Compatibility list of Expansion Card
2. For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual.
LED IndicatorsStatus, 10 GbE, LAN, eSATA, storage expansion port status
USB4x USB 3.0 port (rear)
4x USB 2.0 port (rear)
Support USB printer, pen drive, USB hub, and USB UPS etc.
ButtonsSystem: Power button and reset button
Alarm BuzzerSystem warning
Form Factor2U, Rackmount
Dimensions88(H) x 442.5(W) x 530.5(D) mm
3.46(H) x 17.42(W) x 20.89(D) inch
WeightNet weight (NAS only) : 14.39 kg/ 31.72 lb
Gross weight (with packing and accessories) : 20.54 kg/ 45.28 lb
Sound Level*Sound pressure (LpAm) :55.3 dB(A)
Power Consumption (W)Sleep mode: 73.38
In Operation: 133.88 W
(with 12 x 1TB hard drive installed)
Temperature0-40˚C
Relative Humidity5~95% non-condensing, wet bulb: 27˚C.
Power SupplyRedundant power:
Input: 47-63 Hz; 100-127V~/ 8A; 200-240V/ 4A
Output: 400W
PCIe Slot2 (1* PCIe Gen3 x8, 1* PCIe Gen3 x4)
Fan4 x 6 cm smart cooling fan


QNAP TVS-EC1080+

Product Position : Edge Cloud Turbo vNAS with Intel® Xeon® Quad-core CPU for Breakthrough Performance

Product Highlights :

  • 10GbE-ready, over 2,000 MB/s throughput and 223,000 IOPS breakthrough performance
  • Two internal mSATA cache ports and up to 4 SSDs for caching
  • Scalable design, over 384TB raw capacity


Hardware Specification :

CPUIntel® Xeon® E3-1245 v3 3.4 GHz Quad Core Processor or above
MemorySystem memory: 32 GB DDR3 RAM (non-ECC Memory)
Memory module pre-installed: 8 GB x4
Total memory slots: 4
Flash Memory512MB DOM
Internal Cache PortBuilt-in 256GB (128GB*2) mSATA module for caching
Hard Drive10 x 3.5-inch SATA 6Gbps/3Gbps hard drive or 2.5-inch SATA, 6Gbps/3Gbps hard drive SSD hard drive
NOTE:
1. The standard system is shipped without hard drives.
2. For the hard drive compatibility list, please visit www.qnap.com/compatibility
Hard Drive Tray10 x hot-swappable and lockable tray
LAN Port2 x 10 Gigabit RJ-45 Ethernet port ( Pre-installed in PCIe slot)
4 x 1 Gigabit RJ-45 Ethernet port (on board)
Note:
1. For the optional network card compatibility list, please visit Compatibility list
2. For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual.
LED IndicatorsStatus, LAN, USB, eSATA and 10 GbE
USB3x USB 3.0 port (1 front, 2 rear)
6x USB 2.0 port (rear)
Support USB printer, pen drive, USB hub, and USB UPS etc.
ButtonsSystem: Power button and reset button
Alarm BuzzerSystem warning
Form FactorTower
Dimensions217.5(H) x 327(W) x 321.2(D) mm
8.56(H) x 12.8(W) x 12.65(D) inch
WeightNet weight (NAS only) : 12.52 kg/27.61 lb
Gross weight (with packing and accessories) : 19.75 kg/43.54 lb
Sound Level (dB)Standby: 30.4 dB
In operation: 31.6 dB
(with 10 x 1TB hard drives installed)
Power Consumption (W)Sleep mode: 68W
In Operation: 130W
(with 10 x 1TB hard drives installed)
Temperature0-40˚C
Relative Humidity5~95% non-condensing, wet bulb: 27˚C.
Power SupplyInput: 100-240V AC, 50/60Hz, Output: 350W
PCIe Slot1* PCIe Gen3 x8 ( Pre-installed with QNAP LAN-10G2T-D dual-port 10 Gigabit Network card)
Fan2 x 12 cm smart cooling fan


QNAP TVS-EC1080

Product Position : Edge Cloud Turbo vNAS with Intel® Xeon® Quad-core CPU for Breakthrough Performance

Product Highlights :

  • 10GbE-ready, over 2,000 MB/s throughput and 223,000 IOPS breakthrough performance
  • Two internal mSATA cache ports and up to 4 SSDs for caching
  • Scalable design, over 384TB raw capacity


Hardware Specification :

CPUTVS-EC1080-E3-16G:Intel® Xeon® E3-1245 v3 3.4 GHz Quad Core Processor or above
TVS-EC1080-E3-8G:Intel® Xeon® E3-1245 v3 3.4 GHz Quad Core Processor or above
TVS-EC1080-i3-8G:Intel® Core i3-4150 3.5 GHz Dual Core processor
MemoryTVS-EC1080-E3-8G:
System memory: 8 GB DDR3 RAM (non-ECC Memory)
Memory module pre-installed: 4 GB x2
Total memory slots: 4
Memory expandable up to: 32 GB (8GB x4)
Note: When upgrading RAM to more than 24GB, the original 4GB RAM modules must be removed.
TVS-EC1080-E3-16G:
System memory: 16 GB DDR3 RAM (non-ECC Memory)
Memory module pre-installed: 8 GB x2
Total memory slots: 4
Memory expandable up to: 32 GB (8GB x4)
TVS-EC1080-i3-8G:
System memory: 8 GB DDR3 RAM (non-ECC Memory)
Memory module pre-installed: 4 GB x2
Total memory slots: 4
Memory expandable up to: 32 GB (8GB x4)
Note: When upgrading RAM to more than 24GB, the original 4GB RAM modules must be removed.
Note: For the information of RAM module installation and compatible NAS models, please refer to the QNAP RAM Module Installation Guide
Flash Memory512MB DOM
Internal Cache PortTwo mSATA port on board for read caching
Note:  The standard system is shipped without mSATA flash. For the optional mSATA flash, please visithttp://shop.qnap.com/
Hard Drive10 x 3.5-inch SATA 6Gbps/3Gbps hard drive or 2.5-inch SATA, 6Gbps/3Gbps hard drive SSD hard drive
NOTE:
1. The standard system is shipped without hard drives.
2. For the hard drive compatibility list, please visit www.qnap.com/compatibility
Hard Drive Tray10 x hot-swappable and lockable tray
LAN Port4 x Gigabit RJ-45 Ethernet port (Expandable up to 6 x 1 Gb LAN or 2 x 10 Gb + 4 x 1 Gb LAN by installing optional dual-port 10 Gb and 1 Gb network card)
Note:
1. For the optional network card compatibility list, please visit Compatibility list
2. For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual.
LED IndicatorsStatus, LAN, USB, eSATA and 10 GbE
USB3x USB 3.0 port (1 front, 2 rear)
6x USB 2.0 port (rear)
Support USB printer, pen drive, USB hub, and USB UPS etc.
ButtonsSystem: Power button and reset button
Alarm BuzzerSystem warning
Form FactorTower
Dimensions217.5(H) x 327(W) x 321.2(D) mm
8.56(H) x 12.8(W) x 12.65(D) inch
WeightNet weight (NAS only) : 12.52 kg/27.61 lb
Gross weight (with packing and accessories) : 19.75 kg/43.54 lb
Sound Level (dB)Standby: 30.4 dB
In operation: 31.6 dB
(with 10 x 1TB hard drives installed)
Power Consumption (W)Sleep mode: 68W
In Operation: 130W
(with 10 x 1TB hard drives installed)
Temperature0-40˚C
Relative Humidity5~95% non-condensing, wet bulb: 27˚C.
Power SupplyInput: 100-240V AC, 50/60Hz, Output: 350W
PCIe Slot1 (1* PCIe Gen3 x8)
Fan2 x 12 cm smart cooling fan


QNAP TVS-EC880

Product Position : Edge Cloud Turbo vNAS with Intel® Xeon® Quad-core CPU for Breakthrough Performance

Product Highlights :

  • 10GbE-ready, over 2,000 MB/s throughput and 223,000 IOPS breakthrough performance
  • Two internal mSATA cache ports and up to 4 SSDs for caching
  • Scalable design, over 384TB raw capacity


Hardware Specification :

CPUIntel® Xeon® E3-1245 v3 3.4 GHz Quad Core Processor or above
MemoryTVS-EC880-E3-8G:
System memory: 8 GB DDR3 RAM (non-ECC Memory)
Memory module pre-installed: 4 GB x2
Total memory slots: 4
Memory expandable up to: 32 GB (8GB x4)
Note: When upgrading RAM to more than 24GB, the original 4GB RAM modules must be removed.
TVS-EC880-E3-16G:
System memory: 16 GB DDR3 RAM (non-ECC Memory)
Memory module pre-installed: 8 GB x2
Total memory slots: 4
Memory expandable up to: 32 GB (8GB x4)
Note: For the information of RAM module installation and compatible NAS models, please refer to the QNAP RAM Module Installation Guide
Flash Memory512MB DOM
Internal Cache PortTwo mSATA port on board for read caching
Note:  The standard system is shipped without mSATA flash. For the optional mSATA flash, please visithttp://shop.qnap.com/
Hard Drive8 x 3.5-inch SATA 6Gbps/3Gbps hard drive or 2.5-inch SATA, 6Gbps/3Gbps hard drive SSD hard drive
NOTE:
1. The standard system is shipped without hard drives.
2. For the hard drive compatibility list, please visit www.qnap.com/compatibility
Hard Drive Tray8 x hot-swappable and lockable tray
LAN Port4 x Gigabit RJ-45 Ethernet port
(Expandable up to 6 x 1 Gb LAN or 2 x 10 Gb + 4 x 1 Gb LAN by installing optional dual-port 10 Gb and 1 Gb network card)
Note:
1. For the optional network card compatibility list, please visit Compatibility list
2. For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual.
LED IndicatorsStatus, LAN, USB, eSATA and 10 GbE,
USB3x USB 3.0 port (1 front, 2 rear)
6x USB 2.0 port (rear)
Support USB printer, pen drive, USB hub, and USB UPS etc.
ButtonsSystem: Power button and reset button
Alarm BuzzerSystem warning
Form FactorTower
Dimensions217.5(H) x 327(W) x 321.2(D) mm
8.56(H) x 12.8(W) x 12.65(D) inch
WeightNet weight (NAS only) : 12.52 kg/27.61 lb
Gross weight (with packing and accessories) : 19.75 kg/43.54 lb
Sound Level (dB)Standby: 30.3 dB
In operation: 31.2 dB
(with 8 x 1TB hard drives installed)
Power Consumption (W)Sleep mode: 68W
In Operation: 130W
(with 8 x 1TB hard drives installed)
Temperature0-40˚C
Relative Humidity5~95% non-condensing, wet bulb: 27˚C.
Power SupplyInput: 100-240V AC, 50/60Hz, Output: 350W
PCIe Slot1 (1* PCIe Gen3 x8)
Fan2 x 12 cm smart cooling fan


QNAP TS-1263U-RP

Product Position : High Performance, Affordable Quad-core 10GbE NAS

Product Highlights :

  • Cutting-edge AMD quad-core 2.0 GHz processor with a 10GbE SFP+ port
  • Efficient NAS & iSCSI-SAN (IP-SAN) storage with AES-NI hardware-accelerated encryption
  • Virtualization Station for running multiple VMs with different operating systems


Hardware Specification :

CPUQuad-core 64-bit AMD 2.0GHz
Flash Memory512MB (DOM)
Memory (RAM)4GB DDR3L (4GB x 1)
Number of RAM Slots2 (Max 16GB, SO-DIMM DDR3L)
Note: For the information of RAM module installation and compatible NAS models, please refer to the QNAP RAM Module Installation Guide.
Max. number of HDDs/SSDs12 x 2.5" or 3.5" SATA 6Gb/s, 3Gb/s
NOTE:
1. The system is shipped without HDD.
2. For the HDD compatibility list, please visit https://www.qnap.com/compatibility
Hard Disk Tray12 x Hot-swappable tray
Expansion Enclosure Support1 (UX-1200U-RP, UX-800U-RP)
Gigabit LAN Ports4
10GbE1 x SFP+
Expansion Slot (PCI-E)1 (pre-installed SFP+ NIC)
USB 2.02
USB 3.02
LED IndicatorsHDD 1-12, Status, LAN, USB, Power
ButtonsPower, Reset
System Fan2 x 70mm, 12V DC
Form Factor2U Rackmount
Dimensions (HxWxD) mm89(H) x 482(W) x 534(D) mm
3.5(H) x 18.98(W) x 21.02(D) inch
Weight (Net/ Gross)16.14 kg (35.58 lbs.) / 18.98 kg (41.84 lbs.)
Temperature0 - 40 °C
Humidity5 - 95% R.H
Power Supply SpecificationRedundant 250W, Input: 110-240 Vac~, 50-60Hz, 5A
Power Consumption: (W)HDD Sleep Mode: 57.15 (w/ 10GbE NIC)
In Operation: 143.17(w/ 10GbE NIC)
Sound Level*Sound pressure (LpAm) :39.2 dB(A)


QNAP TS-1263U

Product Position : High Performance, Affordable Quad-core 10GbE NAS

Product Highlights :

  • Cutting-edge AMD quad-core 2.0 GHz processor with a 10GbE SFP+ port
  • Efficient NAS & iSCSI-SAN (IP-SAN) storage with AES-NI hardware-accelerated encryption
  • Virtualization Station for running multiple VMs with different operating systems


Hardware Specification :

CPUQuad-core 64-bit AMD 2.0GHz
Flash Memory512MB (DOM)
Memory (RAM)4GB DDR3L (4GB x 1)
Number of RAM Slots2 (Max 16GB, SO-DIMM DDR3L)
Note: For the information of RAM module installation and compatible NAS models, please refer to the QNAP RAM Module Installation Guide.
Max. number of HDDs/SSDs12 x 2.5" or 3.5" SATA 6Gb/s, 3Gb/s
NOTE:
1. The system is shipped without HDD.
2. For the HDD compatibility list, please visit https://www.qnap.com/compatibility
Hard Disk Tray12 x Hot-swappable tray
Expansion Enclosure Support1 (UX-1200U-RP, UX-800U-RP)
Gigabit LAN Ports4
10GbE1 x SFP+
Expansion Slot (PCI-E)1 (pre-installed SFP+ NIC)
USB 2.02
USB 3.02
LED IndicatorsHDD 1-12, Status, LAN, USB, Power
ButtonsPower, Reset
System Fan2 x 70mm, 12V DC
Form Factor2U Rackmount
Dimensions (HxWxD) mm89(H) x 482(W) x 534(D) mm
3.5(H) x 18.98(W) x 21.02(D) inch
Weight (Net/ Gross)16.14 kg (35.58 lbs.) / 18.98 kg (41.84 lbs.)
Temperature0 - 40 °C
Humidity5 - 95% R.H
Power Supply SpecificationATX 250W, Input: 110-240 Vac~, 50-60Hz, 5A
Power Consumption: (W)HDD Sleep Mode: 44.78 (w/ 10GbE NIC)
In Operation: 135.02 (w/ 10GbE NIC)
Sound Level*Sound pressure (LpAm) :35.7 dB(A)


QNAP TS-863U-RP

Product Position : High Performance, Affordable Quad-core 10GbE NAS

Product Highlights :

  • Cutting-edge AMD quad-core 2.0 GHz processor with a 10GbE SFP+ port
  • Efficient NAS & iSCSI-SAN (IP-SAN) storage with AES-NI hardware-accelerated encryption
  • Virtualization Station for running multiple VMs with different operating systems


Hardware Specification :

CPUQuad-core 64-bit AMD 2.0GHz
Flash Memory512MB (DOM)
Memory (RAM)4GB DDR3L (4GB x 1)
Number of RAM Slots2 (Max 16GB, SO-DIMM DDR3L)
Note: For the information of RAM module installation and compatible NAS models, please refer to the QNAP RAM Module Installation Guide.
Max. number of HDDs/SSDs8 x 2.5" or 3.5" SATA 6Gb/s, 3Gb/s
NOTE:
1. The system is shipped without HDD.
2. For the HDD compatibility list, please visit https://www.qnap.com/compatibility
Hard Disk Tray8 x Hot-swappable tray
Expansion Enclosure Support1 (UX-1200U-RP, UX-800U-RP)
Gigabit LAN Ports4
10GbE1 x SFP+
Expansion Slot (PCI-E)1 (pre-installed SFP+ NIC)
USB 2.02
USB 3.02
LED IndicatorsHDD 1-8, Status, LAN, USB, Power
ButtonsPower, Reset
System Fan2 x 70mm, 12V DC
Form Factor2U Rackmount
Dimensions (HxWxD) mm89(H) x 482(W) x 534(D) mm
3.5(H) x 18.98(W) x 21.02(D) inch
Weight (Net/ Gross)11.02 kg (24.29 lbs.) / 19.26 kg (42.46 lbs.)
Temperature0 - 40 °C
Humidity5 - 95% R.H
Power Supply SpecificationRedundant 250W, Input: 110-240 Vac~, 50-60Hz, 5A
Power Consumption: (W)HDD Sleep Mode: 51.29 (w/ 10GbE NIC)
In Operation: 107.30 (w/ 10GbE NIC)
Sound Level*Sound pressure (LpAm) :36.4 dB(A)


QNAP TS-863U

Product Position : High Performance, Affordable Quad-core 10GbE NAS

Product Highlights :

  • Cutting-edge AMD quad-core 2.0 GHz processor with a 10GbE SFP+ port
  • Efficient NAS & iSCSI-SAN (IP-SAN) storage with AES-NI hardware-accelerated encryption
  • Virtualization Station for running multiple VMs with different operating systems


Hardware Specification :

CPUQuad-core 64-bit AMD 2.0GHz
Flash Memory512MB (DOM)
Memory (RAM)4GB DDR3L (4GB x 1)
Number of RAM Slots2 (Max 16GB, SO-DIMM DDR3L)
Note: For the information of RAM module installation and compatible NAS models, please refer to the QNAP RAM Module Installation Guide.
Max. number of HDDs/SSDs8 x 2.5" or 3.5" SATA 6Gb/s, 3Gb/s
NOTE:
1. The system is shipped without HDD.
2. For the HDD compatibility list, please visit https://www.qnap.com/compatibility
Hard Disk Tray8 x Hot-swappable tray
Expansion Enclosure Support1 (UX-1200U-RP, UX-800U-RP)
Gigabit LAN Ports4
10GbE1 x SFP+
Expansion Slot (PCI-E)1 (pre-installed SFP+ NIC)
USB 2.02
USB 3.02
LED IndicatorsHDD 1-8, Status, LAN, USB, Power
ButtonsPower, Reset
System Fan2 x 70mm, 12V DC
Form Factor2U Rackmount
Dimensions (HxWxD) mm89(H) x 482(W) x 534(D) mm
3.5(H) x 18.98(W) x 21.02(D) inch
Weight (Net/ Gross)11.02 kg (24.29 lbs.) / 19.26 kg (42.46 lbs.)
Temperature0 - 40 °C
Humidity5 - 95% R.H
Power Supply SpecificationATX 250W, Input: 110-240 Vac~, 50-60Hz, 5A
Power Consumption: (W)HDD Sleep Mode: 40.28 (w/ 10GbE NIC)
In Operation: 94.40 (w/ 10GbE NIC)
Sound Level*Sound pressure (LpAm) :35.0 dB(A)