Product Highlights :
- Quad-core Intel? Celeron? 2.0GHz processor, burst up to 2.42GHz
- Full HD video local display via HDMI with free remote control
- Hybrid approach to virtualization: Virtualization Station and Container Station
Hardware Specification :
CPU | TVS-1271U-RP-PT-4G: Dual-core Intel® Pentium® G3250 3.1 GHz Processor |
TVS-1271U-RP-i3-8G: Dual-core Intel® Core™ i3-4150 3.5 GHz Processor | |
TVS-1271U-RP-i5-16G: Quad-core Intel® Core™ i5-4590S 3.0 GHz Processor | |
TVS-1271U-RP-i7-32G: Quad-core Intel® Core™ i7-4790S 3.2 GHz Processor | |
DRAM | TVS-1271U-RP-PT-4G |
System memory: 4 GB DDR3 RAM | |
Memory module pre-installed: 2 GB x2 | |
Total memory slots: 4 | |
Memory expandable up to: 32 GB (8GB x4) | |
Note: When upgrading RAM to more than 20GB, the original 2GB RAM modules must be removed. | |
TVS-1271U-RP-i3-8G: | |
System memory: 8 GB DDR3 RAM | |
Memory module pre-installed: 4 GB x2 | |
Total memory slots: 4 | |
Memory expandable up to: 32 GB (8GB x4) | |
Note: When upgrading RAM to more than 24GB, the original 4GB RAM modules must be removed. | |
TVS-1271U-RP-i5-16G: | |
System memory: 16 GB DDR3 RAM | |
Memory module pre-installed: 8 GB x2 | |
Total memory slots: 4 | |
Memory expandable up to: 32 GB (8GB x4) | |
TVS-1271U-RP-i7-32G | |
System memory: 32 GB DDR3 RAM | |
Memory module pre-installed: 8 GB x4 | |
Total memory slots: 4 | |
For the information of RAM module installation and compatible NAS models, please refer to the QNAP RAM Module Installation Guide | |
Flash Memory | 512MB DOM |
Internal Cache Port | Two mSATA port on board for read caching |
Note: The standard system is shipped without mSATA flash module. For the optional mSATA flash module, please visit http://shop.qnap.com/ | |
Hard Drive | 12 x 3.5-inch SATA 6Gb/s, SATA 3Gb/s hard drive or 2.5-inch SATA, SSD hard drive |
NOTE: | |
1. The standard system is shipped without hard drives. | |
2. For the hard drive compatibility list, please visit www.qnap.com/compatibility | |
Hard Disk Tray | 12 x hot-swappable and lockable tray |
LAN Port | 4 x Gigabit RJ-45 Ethernet port |
(Expandable up to 8 x 1 Gb LAN or 4 x 10 Gb + 4 x 1 Gb LAN by installing optional dual-port 10 Gb and 1 Gb network card) | |
Note: | |
1. For the optional network card compatibility list, please visit www.qnap.com/compatibility | |
2. For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual. | |
LED Indicators | Status, 10 GbE, LAN, storage expansion port status |
USB/eSATA | 4x USB 3.0 port (rear) |
4x USB 2.0 port (rear) | |
Support USB printer, pen drive, USB hub, and USB UPS etc. | |
HDMI | 1 |
Buttons | System: Power button and reset button |
Alarm Buzzer | System warning |
Form Factor | 2U, Rackmount |
Dimensions | 89(H) x 482(W) x 534(D) mm |
3.5(H) x 18.98(W) x 21.02(D) inch | |
Weight | 16.14 kg/ 35.58 lb (Net) |
18.98 kg/ 41.84 lb (Gross) | |
Power Consumption (W) | HDD Standby: |
TVS-1271U-RP-PT-4G: 88.88 | |
TVS-1271U-RP-i3-8G: 87.89 | |
TVS-1271U-RP-i5-16G: 88.91 | |
TVS-1271U-RP-i7-32G: 89.82 | |
In Operation: | |
TVS-1271U-RP-PT-4G: 173.38 | |
TVS-1271U-RP-i3-8G: 176.27 | |
TVS-1271U-RP-i5-16G: 174.64 | |
TVS-1271U-RP-i7-32G: 176.42 | |
(with 12 x WD WD20EFRX hard drive installed) | |
Sound Level* | Sound pressure (LpAm): 45.0 dB(A) |
Temperature | 0~40˚C |
Relative Humidity | 5~95% non-condensing, wet bulb: 27˚C. |
Power Supply | Input : 100-240V~, 50-60Hz, 7A-3.5A |
Output: 500W | |
PCIe Slot | 2 (1* PCIe Gen3 x8, 1* PCIe Gen3 x4) |
Fan | 3 x 7 cm smart cooling fan |