Product Highlights :
- 10GbE-ready, over 3,000 MB/s and 400,000 IOPS breakthrough performance
- SSD caching, thin-provisioned volume
- Scalable design, up to 792TB raw capacity
Hardware Specification :
| CPU | Quad Core Intel® Xeon® E3-1245 v2 Processor 3.4 GHz |
| Memory | System memory: 8 GB DDR3 ECC RAM |
| Memory module pre-installed: 4 GB x2 | |
| Total memory slots: 4 | |
| Memory expandable up to: 32 GB (8GB x4) | |
| Note: | |
| 1. When upgrading RAM to more than 24GB, the original 4GB RAM modules must be removed. | |
| 2. For the information of RAM module installation and compatible NAS models, please refer to the QNAP RAM Module Installation Guide | |
| Flash Memory | 512MB DOM |
| Hard Drive | 24 x 2.5-inch SAS/SATA 6Gb/s, SAS/SATA 3Gb/s hard drive or SSD hard drive |
| NOTE: | |
| 1. The standard system is shipped without hard drives. | |
| 2. For the hard drive compatibility list, please visit https://www.qnap.com/compatibility/ | |
| Hard Drive Tray | 24 x hot-swappable and lockable tray |
| LAN Port | 4 x Gigabit RJ-45 Ethernet port |
| (Expandable up to 8 x 1 Gb LAN or 4 x 10 Gb + 4 x 1 Gb LAN by installing optional dual-port 10 Gb and 1 Gb network card) | |
| NOTE: | |
| 1. For the optional network card compatibility list, please visit Compatibility list of Expansion Card | |
| 2. For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual. | |
| LED Indicators | Status, 10 GbE, LAN, storage expansion port status |
| USB | 2x USB 3.0 port (rear) |
| 4x USB 2.0 port (rear) | |
| Support USB printer, pen drive, USB hub, and USB UPS etc. | |
| Storage Expansion Port | 1 (rear) |
| Buttons | System: Power button and reset button |
| Alarm Buzzer | System warning |
| Form Factor | 2U, Rackmount |
| Dimensions | 88(H) x 439(W) x 520(D) mm |
| 3.46(H) x 17.28(W) x 20.47(D) inch | |
| Weight | 10.8 kg/ 23.81 lb (Net) |
| 16.28 kg/ 35.89 lb (Gross) | |
| Sound Level (dB) | Sound pressure (LpAm) (by stander positions): 46.3 dB |
| ( with 24 x Seagate ST9300653SS hard drive installed ) | |
| Power Consumption (W) | HDD Standby: 138.7 W |
| In Operation: 270 W | |
| (with 24 x Seagate ST9300653SS hard drive installed) | |
| Temperature | 0-40˚C |
| Relative Humidity | 5~95% RH non-condensing, wet bulb: 27˚C |
| Power Supply | Redundant power: |
| Input: 100-240V AC,50-60Hz | |
| Output: 600W | |
| Expansion Slot | 2 (one PCIe Gen2 x4, one PCIe Gen2 x8) |
| Fan | 3 x 6 cm smart cooling fan |
