Product Highlights :
- 10GbE-ready, over 2,000 MB/s throughput and 223,000 IOPS breakthrough performance
- Two internal mSATA cache ports and up to 4 SSDs for caching
- Scalable design, over 384TB raw capacity
Hardware Specification :
| CPU | TVS-EC1080-E3-16G：Intel® Xeon® E3-1245 v3 3.4 GHz Quad Core Processor or above |
| TVS-EC1080-E3-8G：Intel® Xeon® E3-1245 v3 3.4 GHz Quad Core Processor or above | |
| TVS-EC1080-i3-8G：Intel® Core i3-4150 3.5 GHz Dual Core processor | |
| Memory | TVS-EC1080-E3-8G: |
| System memory: 8 GB DDR3 RAM (non-ECC Memory) | |
| Memory module pre-installed: 4 GB x2 | |
| Total memory slots: 4 | |
| Memory expandable up to: 32 GB (8GB x4) | |
| Note: When upgrading RAM to more than 24GB, the original 4GB RAM modules must be removed. | |
| TVS-EC1080-E3-16G: | |
| System memory: 16 GB DDR3 RAM (non-ECC Memory) | |
| Memory module pre-installed: 8 GB x2 | |
| Total memory slots: 4 | |
| Memory expandable up to: 32 GB (8GB x4) | |
| TVS-EC1080-i3-8G: | |
| System memory: 8 GB DDR3 RAM (non-ECC Memory) | |
| Memory module pre-installed: 4 GB x2 | |
| Total memory slots: 4 | |
| Memory expandable up to: 32 GB (8GB x4) | |
| Note: When upgrading RAM to more than 24GB, the original 4GB RAM modules must be removed. | |
| Note: For the information of RAM module installation and compatible NAS models, please refer to the QNAP RAM Module Installation Guide | |
| Flash Memory | 512MB DOM |
| Internal Cache Port | Two mSATA port on board for read caching |
| Note: The standard system is shipped without mSATA flash. For the optional mSATA flash, please visithttp://shop.qnap.com/ | |
| Hard Drive | 10 x 3.5-inch SATA 6Gbps/3Gbps hard drive or 2.5-inch SATA, 6Gbps/3Gbps hard drive SSD hard drive |
| NOTE: | |
| 1. The standard system is shipped without hard drives. | |
| 2. For the hard drive compatibility list, please visit www.qnap.com/compatibility | |
| Hard Drive Tray | 10 x hot-swappable and lockable tray |
| LAN Port | 4 x Gigabit RJ-45 Ethernet port (Expandable up to 6 x 1 Gb LAN or 2 x 10 Gb + 4 x 1 Gb LAN by installing optional dual-port 10 Gb and 1 Gb network card) |
| Note: | |
| 1. For the optional network card compatibility list, please visit Compatibility list | |
| 2. For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual. | |
| LED Indicators | Status, LAN, USB, eSATA and 10 GbE |
| USB | 3x USB 3.0 port (1 front, 2 rear) |
| 6x USB 2.0 port (rear) | |
| Support USB printer, pen drive, USB hub, and USB UPS etc. | |
| Buttons | System: Power button and reset button |
| Alarm Buzzer | System warning |
| Form Factor | Tower |
| Dimensions | 217.5(H) x 327(W) x 321.2(D) mm |
| 8.56(H) x 12.8(W) x 12.65(D) inch | |
| Weight | Net weight (NAS only) : 12.52 kg/27.61 lb |
| Gross weight (with packing and accessories) : 19.75 kg/43.54 lb | |
| Sound Level (dB) | Standby: 30.4 dB |
| In operation: 31.6 dB | |
| (with 10 x 1TB hard drives installed) | |
| Power Consumption (W) | Sleep mode: 68W |
| In Operation: 130W | |
| (with 10 x 1TB hard drives installed) | |
| Temperature | 0-40˚C |
| Relative Humidity | 5~95% non-condensing, wet bulb: 27˚C. |
| Power Supply | Input: 100-240V AC, 50/60Hz, Output: 350W |
| PCIe Slot | 1 (1* PCIe Gen3 x8) |
| Fan | 2 x 12 cm smart cooling fan |
